The Autonerdz Community Forums - Picoscope 3204 A Question

	Welcome, Guest. Please Login or Register

Home

Help

Member Map

Event Calendar

The Autonerdz Community Forums › General Public Area › PicoScope › Picoscope 3204 A Question

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

Picoscope 3204 A Question (Read 2,691 times)

fuzion-d Freshman Member Offline I'm an Autonerd Posts: 3 Near Dortmund Nordrhein-Westfalen Germany Gender:	Picoscope 3204 A Question Jul 30^th, 2012 at 2:35am Hello , Ive got picoscope 3204A and Ive got a question ... and Im new at using scopes ... I want to measure the tension-waste plus-sided for example in the Battery wire from car to the starter .... Now my Question Is it possible ?? I do not want do destroy my Picoscope !!! Can someone help me ??? Greets fuzion-d
Back to top	IP Logged

Tom Roberts

Autonerdz Administrator
Picogroup

Offline

Autonerdz Founder

Posts: 8,598

Olympia
Washington
USA
Gender: male

Re: Picoscope 3204 A Question
Reply #1 - Jul 30^th, 2012 at 8:29am

Possible language barrier here for me....so I may not have this right...

What I understand you to say is you want to do a voltage drop test on the starter positive side.

If this is correct, then keep scope grounded to bat neg and deploy two channels, one on each end of the circuit. Then you can do a math channel like A-B to display the voltage drop.

Avoid ever placing a channel ground on a voltage supply.

Tom Roberts
Forums Administrator

IP Logged

fuzion-d Freshman Member Offline I'm an Autonerd Posts: 3 Near Dortmund Nordrhein-Westfalen Germany Gender:	Re: Picoscope 3204 A Question Reply #2 - Jul 30^th, 2012 at 10:55am Thanks Tom... Its difficult for me i Used google for translation for some words and sometimes teh translation iss sh** sorry for that. But you have understand me correct. Thanks for your answer I understand what you mean. Greets fuzion-d
Back to top	IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›

« Home

‹ Board

Top of this page

Autonerdz forums