The Autonerdz Community Forums

The Autonerdz Community Forums
https://old.autonerdz.com/cgi/yabb2/YaBB.pl General Public Area >> PicoScope >> Fluke 80T-150U Temperature Probe w/ PicoScope? https://old.autonerdz.com/cgi/yabb2/YaBB.pl?num=1196523740 Message started by ziggee on Dec 1^st, 2007 at 7:42am

Title: Fluke 80T-150U Temperature Probe w/ PicoScope?
Post by ziggee on Dec 1^st, 2007 at 7:42am

Hi Tom,
I had obtained a PV350 for use with my PicoQuad along with the ranges you had sent me to set it up. Can the 80T-150U Temperature probe (or other temperature probes for that matter) be set up for use with the Pico 4-channel scope software? It would be for comparing actual engine coolant temperature or oil temperature with ECT voltage to catch the occasional (we know this never happens!) ECT sensor that is out of calibration? I am just curious if this is possible. :question
Thanks,
Ziggee

Title: Re: Fluke 80T-150U Temperature Probe w/ PicoScope?
Post by Tom Roberts on Dec 1^st, 2007 at 9:04am

Ziggee,

You can create a custom probe for anything. You just have to know the voltage to units relationship.

For more specific help doing this post in the Users Area.